Decorative Wall Panels
Decorative wall panels
Decorative wall panels for villas, hotels & restaurants
Marble and travertine looks, flexible stone, WPC and PU, carbon and mineral panels — the texture of real stone without its weight, wet trades or waiting. We work directly with the factories that produce them, and we specify each surface for the climate it will actually live in. Made to order in your dimensions, texture and colour.
Direct from factoryPrice on request, project terms available
146+ finishesStone, WPC, PU, carbon, mineral, marble
Moisture-resistantBathrooms, kitchens, pools & wet zones
Made to orderYour dimensions, texture and colour
What we supply
Five material families, one specification
From practical polyurethane to solid marble. Each family behaves differently under humidity, heat and traffic — we select the one that suits the room, not just the moodboard. All finishes are quoted on request.
PU
Polyurethane panels
Lightweight PU with stone, brick and concrete relief. Feature walls with no added structural load and no dust on site — the most accessible way into a stone look.
WPC
WPC panels & slats
Wood-plastic composite: moisture-resistant flat panels and slatted battens for living areas, corridors and wet zones. The warmth of timber without the swelling.
Stone
Mineral & flexible stone
A thin layer of genuine mineral on a flexible backing — real stone grain and depth at a fraction of the weight, and able to wrap columns and curved walls.
Carbon
Carbon composite panels
Dense, impact-resistant and unaffected by water or steam. Our default recommendation for bathrooms, showers, kitchens and high-traffic commercial walls.
Marble
Natural marble & travertine
Large-format slabs of real stone, book-matched where the design calls for it. For projects where only the genuine material will do.
Bespoke
Made-to-order panels
Non-standard sizes, custom relief, bespoke colour matching and factory-cut openings for switches, lighting and joinery. Produced to your drawings.
Where it is used
Where paint and wallpaper stop working
Panels solve the cases tropical interiors keep running into: stone texture without stone weight, surfaces that shrug off humidity, and a finished wall in days rather than weeks.
01
Living rooms & bedrooms
Travertine, marble, concrete or sandstone behind a TV, headboard or fireplace — with concealed LED grazing to bring out the relief.
02
Bathrooms & wet zones
WPC, mineral and carbon panels replace tiling: large format, minimal joints, unaffected by water and steam. Suitable for showers, WCs and pool surrounds.
03
Hotels, restaurants & offices
Chosen for speed: a venue is refinished without closing. Hard-wearing, repairable panel by panel, and supplied to the construction programme.
Built for the tropics
Specified for humidity, salt and heat
A panel that performs in a dry continental apartment can fail on an island. We specify the panel, the substrate and the fixing method together.
Humidity stability
WPC, mineral and carbon panels do not swell, delaminate or absorb moisture in year-round high humidity.
Salt-air & coastal use
Non-corroding substrates and stainless or composite fixings for beachfront villas and pool pavilions.
Ventilated cavity
On battens we keep a ventilated gap behind the panel so any condensation dries out instead of sitting against the wall.
Moisture-resistant substrates
Fibre-cement board, marine ply or aluminium sub-frames in wet zones — never standard MDF behind a shower.
Mould & mildew resistance
Closed-cell and mineral surfaces give mould nothing to feed on; joints are sealed with sanitary-grade sealant.
Fire performance
Fire-classified panel options for hotels, restaurants and public buildings — classification documents supplied per collection.
Textures & formats
Large format, minimal joints
Panels are supplied as large sheets and slats rather than small tiles, so a wall reads as one continuous surface. Exact sheet sizes, thicknesses and weights are confirmed per collection on the technical sheet we send with your selection.
Selected collections
A sample of the current range
A small extract from a catalogue of 146+ references, plus extended factory ranges available on request. Every finish is quoted individually — send us the wall areas and we will come back with a selection and a proposal.
Installation
A finished wall in a day, not a week
Panels are bonded with adhesive onto a level substrate, or screwed to a batten sub-frame where the wall is uneven or a ventilated cavity is needed. No wet trades, no curing time, no dust — cutting is done with ordinary site tools.
Direct adhesive fixing
Onto plaster, render or board that is flat, dry and primed. The fastest method for dry rooms.
Batten sub-frame
Aluminium or composite battens level the wall and create a ventilated cavity — the preferred method in humid climates.
Wet-zone build-up
Fibre-cement or marine-grade substrate, sealed joints and drainage detail behind showers and pools.
Movement allowance
Perimeter gaps and joint tolerances sized for thermal movement under strong sun and air-conditioning cycles.
Integrated lighting
Coordination with LED profiles, grazing details and driver locations so the relief is lit, not flattened.
Trims & junctions
Matching internal and external corners, end profiles and joint covers supplied with the panels.
How we work
From drawings to delivery on site
1
Brief in
Plans, elevations, renders, references or site photos.
2
Selection
Panel family, texture and colour matched to each room.
3
Proposal
Specification, quantities, substrate and fixing notes.
4
Samples
Physical samples and catalogues approved before order.
5
Production
Made to order, QC checked, packed and shipped to site.
6
Support
Installation guidance for your contractor or ours.
Selected work
Panels in interiors & textures up close
Completed interiors alongside factory texture shots — travertine, granite, relief surfaces and flexible stone.
Why RODESIGNE
A project partner, not a reseller
We represent the factories rather than buying through intermediaries — the same partners we use for lighting, stone and furniture. That means one specification, one shipment and one point of responsibility.
Direct factory access
No layers of middlemen between your drawing and the production line.
146+ references
Plus extended factory ranges beyond the published catalogue.
Made to order
Dimensions, texture and colour produced to your specification.
Wet-zone expertise
Bathrooms, kitchens and pools — substrate and detailing included.
Project terms
Dedicated terms and a delivery programme for volumes from 200 m² upward.
One coordinated package
Panels, stone, lighting and furniture selected to work together.
Related
The rest of the finish package
Panels rarely arrive alone. We can bring the stone, the light and the joinery into the same specification and the same shipment.
Finishes
Acoustic & slatted systems
Felt-backed slat panels and acoustic wall treatments that cut reverberation in restaurants, studios, meeting rooms and double-height villa living spaces.
Stone
Natural stone & marble
Worktops, bar fronts, vanity tops and stone joinery cut from the same slabs as your wall panels.
Stone
Backlit translucent stone
Illuminated onyx and translucent panels for reception desks, bar counters and feature walls.
Service
Turnkey project supply
Full FF&E and finishes packages for villas, hotels and restaurants — specified, produced and shipped as one project.
Lighting
Technical & architectural lighting
Grazing, wall-washing and linear profiles specified together with the panels so the texture actually reads.
Furniture
Custom furniture & decor
Joinery, loose furniture and decor finished to match the panel palette across the whole interior.
FAQ
Common questions
The questions that come up most often before an order.
How much do decorative wall panels cost?
Price on request. Panels range from lightweight PU through WPC, mineral and flexible stone, carbon composite and up to solid marble, so cost depends entirely on the family, texture and area. Send us your wall areas and we will return a selection with a proposal. Dedicated project terms apply from 200 m² upward.
What is the difference between PU, WPC and mineral panels?
PU (polyurethane) panels are lightweight, with a moulded stone or concrete relief — the most accessible option. WPC is a wood-plastic composite: moisture-resistant, well suited to bathrooms and available as flat panels or slats. Mineral and flexible stone panels carry a thin layer of genuine mineral, giving the most authentic texture at low weight.
Which panels are suitable for a bathroom or shower?
WPC, carbon composite and mineral panels. They are unaffected by water and steam, install in large format with almost no joints, and give a practical alternative to tiling. In a shower we specify a fibre-cement or marine-grade substrate and seal the joints with sanitary-grade sealant.
Will they survive a tropical climate?
Yes, when specified correctly. We use closed-cell and mineral panels that do not absorb moisture, non-corroding fixings for coastal and beachfront sites, and a battened ventilated cavity so condensation can dry out rather than sit against the wall.
How are the panels installed?
Bonded with adhesive onto a flat, dry, primed substrate, or fixed to a batten sub-frame where the wall is uneven or a ventilated cavity is required. There are no wet trades and no curing time — a room can be finished in a day instead of a week of tiling. Cutting is done with ordinary site tools.
Can panels be made to order?
Yes — dimensions, texture and colour to your specification, including factory-cut openings for switches, lighting and joinery. We work directly with the factories, so bespoke production runs and a delivery programme are arranged for project volumes.
Do marble-look panels really look like stone?
Modern PU and mineral panels reproduce the grain, veining and relief of stone closely enough that it is hard to tell at close range. Where only the genuine material is acceptable, we supply natural marble and travertine panels and stone products instead.
Can I see samples before ordering?
Yes. We send physical texture samples and the full catalogue before any order, and we can put together a selection tailored to your project and lighting conditions.
Are the panels approved for hotels and restaurants?
Fire-classified panel options are available for commercial and public buildings. Classification documents and technical data sheets are supplied per collection with the specification.
Start your project
Let us specify the panels for your project
Send the wall areas and a reference for the interior — we will select the panel family and texture, prepare a proposal with installation notes, and get samples to you.
Request selection & samples
Get in touch
Request a selection, samples and a proposal
Tell us about the rooms, the areas and the look you are after. All finishes are quoted on request — we will come back with options rather than a price list.
To attach drawings, renders or PDFs — message us on WhatsApp or LINE: